M600i

[carlover76]

hello... yong san... please adv what is new ?? my current is at R3A004...
whats the latest ?

Eh...what is your current phone firmware. Mine is R4A002.

Mine also R4A, install the Blackberry software V3.28 but Singtel system not able to recognise my pin and IMEI number so unable to use it now. Sigh!

[carlover76]

Very fed up with Accord service centre, make me run two trip as they said will help me install the latest firmware for Blackberry software but found out that Ver 3.28 is the latest and it will not work with R3A and above, Ver 3.31 is the latest software version.

Had to go down for another trip to reload with Ver 3.31, sigh! 

Anyone here has wrap up your phone cos me thinking of Gwrap it instead since there is no sign of casing in the market and with Gwrap, it can help you protect your phone from scratches and dirts especially white colour. 

[pianodancer]

which color do you think is nicer ? white or black ?

does the white color gets dirty easily ?

anywhere got sell silicon case or plastic case for the phone yet ?

I was advised that the white color gets dirty easily, and it's probably right, coz the plastic surface feels like it will kanna 'bruised' like the white iBook.

Firmware already R4A? What are the improvements? I only upgraded to R3A last Friday. Upgrading is a pain, coz they wipe out all your settings.

[carlover76]

which color do you think is nicer ? white or black ?

does the white color gets dirty easily ?

anywhere got sell silicon case or plastic case for the phone yet ?

I was advised that the white color gets dirty easily, and it's probably right, coz the plastic surface feels like it will kanna 'bruised' like the white iBook.

Firmware already R4A? What are the improvements? I only upgraded to R3A last Friday. Upgrading is a pain, coz they wipe out all your settings.

You can do all your upgrade online instead of service centre and R4A only available online, Service centre still having R3A.

But there is one minor bug in R4A, when you click on "New Task" from the top left corner of the screen whereby there is a black arrow type of icon beside the network signal indicator, you will get an error message that says "Bad Request", it means that function not able to work, rest of the function is ok.

So if you add new task by going into the task menu then there is no problem.

[tyongchi]

which color do you think is nicer ? white or black ?

does the white color gets dirty easily ?

anywhere got sell silicon case or plastic case for the phone yet ?

I was advised that the white color gets dirty easily, and it's probably right, coz the plastic surface feels like it will kanna 'bruised' like the white iBook.

Firmware already R4A? What are the improvements? I only upgraded to R3A last Friday. Upgrading is a pain, coz they wipe out all your settings.

You can do all your upgrade online instead of service centre and R4A only available online, Service centre still having R3A.

But there is one minor bug in R4A, when you click on "New Task" from the top left corner of the screen whereby there is a black arrow type of icon beside the network signal indicator, you will get an error message that says "Bad Request", it means that function not able to work, rest of the function is ok.

So if you add new task by going into the task menu then there is no problem.

Same error even at R3A. But no issue since never need to access those keys. Dun know why u need them in the first place.

[adnhk]

Hi Guys,

Ok, I now have Chinese fonts to upload for M600i users but I am afraid it is too big.

Hi Dairin, can you help? Thanks in advance.

[Dairin]

Hi Guys,

Ok, I now have Chinese fonts to upload for M600i users but I am afraid it is too big.

Hi Dairin, can you help? Thanks in advance.

pls email n PM me once u done ... will help to upload to SEC server

[plim]

adnhk, thank you in advance for the Chinese Font hor...
I needed it quite badly as my MP3s are showing loads of rubbish !!!

Alternatively, is there a way to download from the SE support ?

[adnhk]

Sorry guys, been working very very late today Leroyong knows my bad bad bad day today Okie, sent to you already Dairin. Please help to upload it. Thanks in advance.

Btw, I received info that it works for some, but it also does not work for some. Hence we believe it may be firmware differences and perhaps it works with some firmware and fails on some too. Please try it at your own risk cos even though I just received my test set again today, but it does not come with M2 stick Oh, some tested it to work on the 64MB M2 that comes with your package but failed on the 1GB M2 on the same device and perhaps you guys can try out if the default one works in case it fails on your newly purchased 512MB or 1GB M2 stick. Here are the steps:

1. Connect your M600i to your PC via file transfer mode.
2. In the root of your M2 stick's assigned drive letter, create a folder named: Resource
3. Now go into Resource folder, and create a subfolder named: Fonts
4. Copy all 5 files into Resource\Fonts folder and reboot the phone.

Good Luck

[plim]

admhk, any idea if the files are uploaded ? ... I would like to do a test on my M600 !!! ... cant wait to see
the results... btw, is there a Chinese Dict just like the one in P910 ?

[plim]

adnhk, I downloadded the files and now able to View Chinese Fonts.

Does it supports Chinese writing too ? just curious to know if there are any...its OK if there aint ....

Thanks ... It works on my 1gb m2 card.

Rgds

[carlover76]

Sorry guys, been working very very late today Leroyong knows my bad bad bad day today Okie, sent to you already Dairin. Please help to upload it. Thanks in advance.

Btw, I received info that it works for some, but it also does not work for some. Hence we believe it may be firmware differences and perhaps it works with some firmware and fails on some too. Please try it at your own risk cos even though I just received my test set again today, but it does not come with M2 stick Oh, some tested it to work on the 64MB M2 that comes with your package but failed on the 1GB M2 on the same device and perhaps you guys can try out if the default one works in case it fails on your newly purchased 512MB or 1GB M2 stick. Here are the steps:

1. Connect your M600i to your PC via file transfer mode.
2. In the root of your M2 stick's assigned drive letter, create a folder named: Resource
3. Now go into Resource folder, and create a subfolder named: Fonts
4. Copy all 5 files into Resource\Fonts folder and reboot the phone.

Good Luck

Thanks to Adnhk, I managed to view chinese fonts liao.....with my default 64MB M2.

[adnhk]

Hi plim, gdr and ttf are fonts only file I'm afraid Let's hope when more Chinese version of M600i is sold in HK, perhaps someone can help to rip out their Chinese input for us

Glad to know it works for all of your M600i thus far Arggg... will try to find an M2 card for testing cos my test set does not come with one

Cheers

[terencek888]

Hi plim, gdr and ttf are fonts only file I'm afraid Let's hope when more Chinese version of M600i is sold in HK, perhaps someone can help to rip out their Chinese input for us

Glad to know it works for all of your M600i thus far Arggg... will try to find an M2 card for testing cos my test set does not come with one

Cheers

Hi adnhk.

I dont mind lending you my 64MB card for testing as I already have the 1GB...
Cheers!

[adnhk]

Hi plim, gdr and ttf are fonts only file I'm afraid Let's hope when more Chinese version of M600i is sold in HK, perhaps someone can help to rip out their Chinese input for us

Glad to know it works for all of your M600i thus far Arggg... will try to find an M2 card for testing cos my test set does not come with one

Cheers

Hi adnhk.

I dont mind lending you my 64MB card for testing as I already have the 1GB...
Cheers!

Thanks, but I've made arrangements with Leroyong to lend me his this coming week Appreciate your kindness